Kingfisher1 SDK V2.04 ReleaseNote

From rs_wiki
Revision as of 05:20, 17 December 2018 by HuangKun (talk | contribs) (Created page with "Version:V2.04<br/> Release Date:Sep 07, 2018<br/> '''1. New Function & Bug Fix'''<br/> ::1.1 Add the support for models 113S and 113M.<br/> ::1.2 Modify the communicatio...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Version:V2.04

Release Date:Sep 07, 2018

1. New Function & Bug Fix

1.1 Add the support for models 113S and 113M.
1.2 Modify the communication protocol with the USB control device, and change the LibUSB to standard USB driver to improve the efficiency and reliability of communication.
This modification is not compatible with the old system.
If you are using the new SDK library on the old device, please run the V2.04 Demo installer to install the new driver.
1.3 Optimize the delay trigger function.


2. Updating Steps

1. Update Drivers and Demo program
Copy ROSEEK_KFMainSystem_Setup_V2.04.exe to Camera local and run.
2 Update Firmware
First make sure that KFDemo or the user program that contains the update function is already running.
Please use the Device Information in the KFDemo toolbar to view device information.
Please use the KFSDK\UtilTools\ directory utility RSRemoteUpdateToolM.exe to update the firmware.
If you are updating the firmware of the controller, please select "Dev_Host" in the device list of the upgrade tool.
If you are updating the firmware of the RoseekLink interface camera, select "Dev_Camera_<n>" in the device list according to the name of the interface accessed on the panel.
3 Update Source Code
If it is a new project development, please refer to the new version of KFDemo, replace the used header files, library files and the dynamic link library of the bin directory.
If you are developing directly on the Demo project, please migrate all changes to the new version of the Demo project.


3. Version Info:

KF1, KF2:
Name: roseek_kf2_peripheral           Version: 2.11 Date: Sep_05_2018 Description: Peripheral controller module for kf2
Name: Name: roseek_kf_maincore     Version: 2.04 Date: Aug_27_2018 Description: Main core module for kf
DF1(113s, 113m, 101s, 101m):
FPGA Version:          0xB
DF1(150s, 150m, 130s, 130m):
FPGA Version:          0xC