Woodpecker1 SDK v1.21 Known Issue

From rs_wiki
Revision as of 03:24, 11 December 2018 by HuangKun (talk | contribs) (Created page with "WoodPecker1 SDK v1.21 Known Issue:<br/> <br/> 1. Image IDs acquired by some CMOS cameras are not continuous. (self-test)<br/> 2. The 1C0 camera does not support the ROI mode,...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

WoodPecker1 SDK v1.21 Known Issue:

1. Image IDs acquired by some CMOS cameras are not continuous. (self-test)
2. The 1C0 camera does not support the ROI mode, but the WPDemo interface does not have special restrictions, making it seem that the 1C0 camera ROI has a problem. (self-test)
3. The CCD camera has an uneven image time point, which is about twice the frame rate. (Hangzhou Huicui)
4. The external trigger interrupt will not be issued after a certain period of time.
5. External trigger without flash. (Shanghai Canghong feedback question)
6. After the continuous mode ends, the FPGA is reset and the IO port no longer functions.

Retrieved from "http://www.roseek.com/wiki/index.php?title=Woodpecker1_SDK_v1.21_Known_Issue&oldid=301"