Cheetah1 SDK v1.16 ReleaseNote

Version：V1.16

Release Date：Jul 5, 2017

1. New Function & Bug Fix

1.1 Improved power sychronization function for CMOS image sensor camera

1.2 Added hardware timer correction function for each frame time stamp and provided hardward Tick count(CT_RAWFRAME.Timestamp, CT_RAWFRAME_V2.TickCount_us).

1.3 Removed the setting to close FPGA after calling "Roseek_Capture_Destroy"

1.4 Solved a bug casued by IO trigger interruption

1.5 Solved a bug when GPIO as power sync source.

1.6 The default setting of CMOS image sensor camera is no gain.

1.7 Added the interface "Roseek_System_Shutdown" and added a function of file system check synchronization to disk when calling the APIs related to rebooting and shutdown.

1.8 Set saturation level to 0 to output mono image when switching to IR pass filter.

1.9 Solved watchdog issue for CMOS image sensor camera

1.10 Solved a bug for "Roseek_Capture_FetchFconFrame"

1.11 Added OSDFormat.DisplayFormat

1.12 Added Roseek_MediaEncoder_SetScaleMode

1.13 Do not reset IP address anymore when DEMO start up

1.14 Changed the baud rate to enum mode for RS232 and RS485

1.15 Changed watchdog rebooting to cold start for V150 hardware revision

1.16 Improved system shutting down process

1.17 Added QT demo to linux

1.18 Increase the Linux version to support the number and size of image caches.

2. Updating Steps

2.1 Update Drivers and Demo program

For Windows Version:

Copy ROSEEK_CTMainSystem_Setup_V1.16.exe to Camera local and run.

For Linux Version:

Please refer to SDK_PATH/CTSDK_Linux_ubuntu16/README.txt

2.2 Update Firmware

Run SniperViewer2(V1.27 or higher) in PC and connect with camera.

2.3 Update Source Code

Replace the Source Code with what in CTDemo folder.

If the user's program is not based on our SourceCode, please just replace the latest libraries in the folder.

3. Version Info:

Windows:

Name: roseek_ct1_maincore    Version: 1.24 Date: Oct_30_2018 Description: Main core module for wp1

Name: roseek_ct1_fpga     Version: 2.54 Date: May_26_2017 Description: FPGA module for wp1

Name: roseek_ct1_peripheral   Version: 1.07 Date: Feb_29_2018 Description: Peripheral controller module for wp1

Name: roseek_ct1_dll_stream    Version: 1.12 Date: Jan_15_2018 Description: Extension controller module for wp1

Name: roseek_ct1_dll_netcmd  Version: 1.08 Date: Mar_13_2018 Description: NetCMD module for wp1

Name: roseek_ct1_dll_stream   Version: 1.02 Date: Jun_24_2016 Description: Stream module for ct1

Name: roseek_ct1_dll_media    Version: 1.07 Date: Jun_28_2017 Description: Media module for ct1

Name: roseek_ct1_dll_osd      Version: 1.02 Date: Jul_14_2017 Description: OSD module for ct1

Linux:

Name: roseek_wp1_maincore    Version: 1.24 Date: Oct_30_2018 Description: Main core module for wp1

Name: roseek_wp1_fpga     Version: 2.54 Date: May_26_2017 Description: FPGA module for wp1

Name: roseek_wp1_peripheral   Version: 1.07 Date: Feb_29_2018 Description: Peripheral controller module for wp1

Name: roseek_wp1_extension    Version: 1.12 Date: Jan_15_2018 Description: Extension controller module for wp1

Name: roseek_wp1_dll_netcmd  Version: 1.08 Date: Mar_13_2018 Description: NetCMD module for wp1

Name: roseek_ct1_dll_stream   Version: 1.02 Date: Jun_24_2016 Description: Stream module for ct1

Name: roseek_ct1_dll_media    Version: 1.07 Date: Jun_28_2017 Description: Media module for ct1

Name: roseek_ct1_dll_osd      Version: 1.02 Date: Jul_14_2017 Description: OSD module for ct1

CCD colour:

Name: roseek_ct1_fpga     Version: 2.43 Date: May_14_2017 Description: FPGA module for ct1

CCD mono:

Name: roseek_ct1_fpga     Version: 2.44 Date: May_15_2017 Description: FPGA module for ct1

CMOS:

Name: roseek_ct1_fpga     Version: 2.46 Date: May_17_2017 Description: FPGA module for ct1