Difference between revisions of "Woodpecker1 SDK v1.21 Known Issue"
(Created page with "WoodPecker1 SDK v1.21 Known Issue:<br/> <br/> 1. Image IDs acquired by some CMOS cameras are not continuous. (self-test)<br/> 2. The 1C0 camera does not support the ROI mode,...") |
(No difference)
|
Latest revision as of 03:24, 11 December 2018
WoodPecker1 SDK v1.21 Known Issue:
1. Image IDs acquired by some CMOS cameras are not continuous. (self-test)
2. The 1C0 camera does not support the ROI mode, but the WPDemo interface does not have special restrictions, making it seem that the 1C0 camera ROI has a problem. (self-test)
3. The CCD camera has an uneven image time point, which is about twice the frame rate. (Hangzhou Huicui)
4. The external trigger interrupt will not be issued after a certain period of time.
5. External trigger without flash. (Shanghai Canghong feedback question)
6. After the continuous mode ends, the FPGA is reset and the IO port no longer functions.
