Difference between revisions of "WoodPecker1 SDK v1.21 Known Issue"
(Created page with "WoodPecker1 SDK v1.21_已知问题：<br/> <br/> 1. 某些CMOS相机获取到的图像ID不连续。（自测）<br/> 2. 1C0相机不支持ROI模式，但是WPDemo界面没有...") |
|||
| Line 1: | Line 1: | ||
| − | + | 1. Image IDs acquired by some CMOS cameras are not continuous. (self-test)<br/> | |
| − | + | 2. The 1C0 camera does not support the ROI mode, but the WPDemo interface does not have special restrictions, making it seem that the 1C0 camera ROI has a problem. (self-test)<br/> | |
| − | + | 3. The CCD camera has an uneven image time point, which is about twice the frame rate. (Hangzhou Huicui)<br/> | |
| − | 2. | + | 4. The external trigger interrupt will not be issued after a certain period of time.<br/> |
| − | 3. | + | 5. External trigger without flash. (Shanghai Canghong feedback problem)<br/> |
| − | 4. | + | 6. After the continuous mode ends, the FPGA is reset and the IO port is no longer active.<br/> |
| − | 5. | ||
| − | 6. | ||
Latest revision as of 06:36, 5 November 2018
1. Image IDs acquired by some CMOS cameras are not continuous. (self-test)
2. The 1C0 camera does not support the ROI mode, but the WPDemo interface does not have special restrictions, making it seem that the 1C0 camera ROI has a problem. (self-test)
3. The CCD camera has an uneven image time point, which is about twice the frame rate. (Hangzhou Huicui)
4. The external trigger interrupt will not be issued after a certain period of time.
5. External trigger without flash. (Shanghai Canghong feedback problem)
6. After the continuous mode ends, the FPGA is reset and the IO port is no longer active.
