Difference between revisions of "Treefrog1 Series"
(创建页面，内容为“树蛙系列 常见问题：<br/> TF1 端子4.5的使用，根据用户实际情况需要进行跳线配置。<br/> 如直接接护罩内的LED，在排线接好后…”) |
|||
| Line 1: | Line 1: | ||
| − | + | Treefrog1 Series | |
| − | + | Problems:<br/> | |
| − | TF1 | + | The use of TF1 terminal 4.5 requires jumper configuration according to the actual situation of the user.<br/> |
| − | + | For example, if the LED in the shield is directly connected, after the cable is connected, there is a pull-up circuit. Therefore, unlike the ISO output of the camera, the camera configuration output should be 3.2V when disconnected, and closed to 0V.<br/> | |
| − | + | If you need to pick up your own device, the jumper should be jumpered according to the instructions in the specification sheet.<br/> | |
Revision as of 05:22, 5 November 2018
Treefrog1 Series
Problems:
The use of TF1 terminal 4.5 requires jumper configuration according to the actual situation of the user.
For example, if the LED in the shield is directly connected, after the cable is connected, there is a pull-up circuit. Therefore, unlike the ISO output of the camera, the camera configuration output should be 3.2V when disconnected, and closed to 0V.
If you need to pick up your own device, the jumper should be jumpered according to the instructions in the specification sheet.
