Difference between revisions of "Treefrog1 Series"

Revision as of 02:50, 27 November 2018

Treefrog1 Series

@@ Line 1: / Line 1: @@
 Treefrog1 Series
-Problems:<br/>
+[[Woodpecker1_FAQ|Woodpecker1 Q&A]]<br/>
-The use of TF1 terminal 4.5 requires jumper configuration according to the actual situation of the user.<br/>
-For example, if the LED in the shield is directly connected, after the cable is connected, there is a pull-up circuit. Therefore, unlike the ISO output of the camera, the camera configuration output should be 3.2V when disconnected, and closed to 0V.<br/>
-If you need to pick up your own device, the jumper should be jumpered according to the instructions in the specification sheet.<br/>