View source for WoodPecker1 SDK v1.21 Known Issue

1. Image IDs acquired by some CMOS cameras are not continuous. (self-test)<br/>
2. The 1C0 camera does not support the ROI mode, but the WPDemo interface does not have special restrictions, making it seem that the 1C0 camera ROI has a problem. (self-test)<br/>
3. The CCD camera has an uneven image time point, which is about twice the frame rate. (Hangzhou Huicui)<br/>
4. The external trigger interrupt will not be issued after a certain period of time.<br/>
5. External trigger without flash. (Shanghai Canghong feedback problem)<br/>
6. After the continuous mode ends, the FPGA is reset and the IO port is no longer active.<br/>