View source for Kingfisher2 SDK V2.03 ReleaseNote

Version：V2.03<br/>

Release Date：Jul 04, 2018<br/>

'''1. New Function & Bug Fix'''<br/>
::1.1 Fix the InputIO TriggerDelay function.<br/>
::1.2 Fix the function: set the InputIO as LED trigger signal.<br/>
::1.3 Optimize ISP function.<br/>
::1.4 Newly support RSDF150S and RSDF150M cameras.<br/>

'''2. Updating Steps'''<br/>
:1. Update Drivers and Demo program<br/>
::Copy ROSEEK_KFMainSystem_Setup_V2.03.exe to Camera local and run.<br/>
:2 Update Firmware<br/>
::First make sure that KFDemo or the user program that contains the update function is already running.
::Please use the Device Information in the KFDemo toolbar to view device information.
::Please use the KFSDK\UtilTools\ directory utility RSRemoteUpdateToolM.exe to update the firmware.
::If you are updating the firmware of the controller, please select "Dev_Host" in the device list of the upgrade tool.
::If you are updating the firmware of the RoseekLink interface camera, select "Dev_Camera_<n>" in the device list according to the name of the interface accessed on the panel.<br/>
:3 Update Source Code<br/>
::If it is a new project development, please refer to the new version of KFDemo, replace the used header files, library files and the dynamic link library of the bin directory.<br/>
::If you are developing directly on the Demo project, please migrate all changes to the new version of the Demo project.<br/>


'''3. Version Info:'''<br/>
:KF1, KF2:<br/>
:Name: roseek_kf2_peripheral &nbsp;&emsp;&emsp; &emsp;&emsp; &emsp;&emsp; Version: 2.09 Date: Jul_04_2018 Description: Peripheral controller module for kf2<br/>
:Name: Name: roseek_kf_maincore&emsp;&emsp;&emsp;&emsp;&emsp;Version: 2.03 Date: Jul_04_2018 Description: Main core module for kf<br/>

:DF1(113s, 113m, 101s, 101m):
:FPGA Version:           &nbsp;&emsp;&emsp; &emsp;&emsp;0xB

:DF1(150s, 150m):
:FPGA Version:           &nbsp;&emsp;&emsp; &emsp;&emsp;0xC